您现在位置：模拟考场> 湖北普通专升本> 计算机> 浏览试题
热门试题
-
1.
46.试述矛盾的主要方面和次要方面关系的原理，并用这一原理说明怎样正确认识我国改革开放的形势。
-
2.
38.
-
3.
3.Friction is a force which opposes motion. Much of the energy supplied to a complicated machine with many moving parts is wasted in overcoming this opposition. The energy is converted into useless heat. The amount thus lost can be considerably reduced and the life of the machine prolonged by careful lubrication. This reduction improves the efficiency of the machine. Another way in which friction is reduced is to substitute roller or ball bearings for the earlier type of bearing, in which the surfaces in contact move by sliding. Bearings of these later types are used very extensively in many kinds of modern machinery.It must not be assumed, however, that friction is always a disadvantage. In many instances it is highly important. Belts are often used in conveying power from one machine to another. In the absence of friction, this could not be done. The driving wheel would not run the belt, neither would the belt run the wheel to driver. Without friction, then, belted machinery could not be used. Again in the case of all motor vehicles, friction is essential in the operation of the brake. Were there no friction, there could be no brake. But even this illustration does not give an adequate picture of the importance of friction. The vehicle could not even be started if it were not for the friction exerted between the tires and the road. Nails hold in wood, and screws hold in either wood or metal by reason of friction, without which they would be useless. Walking is difficult enough on an icy pavement, but it would be wholly impossible if there were no friction at all between the shoe and the pavement.(5分)3.1Friction arises when____.(1分)A. an opposing force of motion existsB. the energy is wastedC. everything is motionlessD. a complicated machine is supplied with energy
-
4.
当据以计算回归方程式y=a+bx的一组实际数据点大致在回归直线上下接近于正态分布时，实际值落入预测值t+1上下区间内的概率达到95％的置信区间是( )
-
5.
24．用户满意标准战略
